Day 2: Initial Configuration in Software

Step 1: Input setup

miniDSP software, input configuration: - Input 1 (Left): Gain 0 dB, no EQ - Input 2 (Right): Gain 0 dB, no EQ - Test tone at 0 dBFS, observe input meters peak at -1 dBFS (headroom maintained)

Step 2: Output routing

Matrix mixer configured: - Output 1 (L tweeter): 100% Input 1 - Output 2 (R tweeter): 100% Input 2 - Output 3 (L midbass): 100% Input 1 - Output 4 (R midbass): 100% Input 2 - Output 5 (Subwoofer): 50% Input 1 + 50% Input 2 (mono sum)

Step 3: Initial crossover points

Based on driver specs: - Tweeter HPF: 3000 Hz, LR4 (24 dB/oct) - Midbass: - HPF: 80 Hz, LR4 - LPF: 3000 Hz, LR4 - Subwoofer LPF: 80 Hz, LR4 - Subsonic: 28 Hz, Butterworth 24 dB/oct (driver Fs = 35 Hz, sealed box)

Step 4: Initial levels

All outputs set to 0 dB for baseline. Will adjust after measurement.

Step 5: No EQ yet, no time alignment yet

Save configuration as "BaselineNoTANoEQ_v1.xml"